Supplier, Suppliers, Supply, Supplies Single Component Sprayer Graco ~ Creative Enchitect (M) Sdn Bhd

Single Component Sprayer Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam, Singapore, China, Vietnam

Graco King E Series

Graco’s King Electric Series E50 and E60 Electric Airless Sprayers
Graco’s King E50 and E60 Electric Airless Sprayers are the world’s first electric sprayer for protective coatings approved for hazardous locations. This series operates on a more reliable, convenient and available electric power source, which improves jobsite inefficiencies associated with compressors. If your air compressor goes down, you no longer have to stop production. More so, electric technology eliminates pulsation and motor icing making your jobs run smoothly - every time!

The King E60 & E70 Electric Sprayers are an electric alternative to air-operated single-leg sprayers. They produce a smooth, consistent, evenly distributed spray pattern – without the need to tow a large compressor.

Ditch the air compressor –– The King E-Series industrial line of electric sprayers is truly airless technology, eliminating pulsation and motor icing to avoid pressure drops, resulting in a better finish.

King E-Series vs Pneumatic Industrial Sprayers

Increased Efficiencies - No need to convert electricity into pneumatic power, making your operation more efficient. According to the U.S. Department of Energy, up to 30% of the electricity consumed in a typical industrial facility is for generating compressed air.
Reduced Noise – When compared to an air motor, the electric King is up to five times quieter. With an electric driver, noise is reduced to less than 80 dBA
Consistent Coverage - Electric technology eliminates pulsation and motor icing to avoid pressure drops, resulting in a better finish

		• • •	Hazardous Location Approved First electric sprayer to be approved for use in hazardous locations ATEX, IECEX, and Class 1, DIV 1 approvals Ordinary location models available
		• •	Quality Finish Smoother change overs Truly airless technology eliminates pulsation and motor icing to avoid pressure drops, resulting in a better finish
		• • •	Ease of Use Simple setup – plug-in and spray Power with flexibility; wire to 220V or 110V Energy savings – According to the U.S. Department of Energy, up to 30% of the electricity consumed in a typical industrial facility is for generating compressed air

	IDEAL APPLICATION Industrial In-Plant Manhole Restoration
	PROTECTIVE COATINGS Zinc – Epoxy – Urethane 100% Solids Compatible
	ENERGY SAVING Saving air compressor Stay productive

T4 Pneumatic Transfer Pump

Graco T4 Pneumatic Transfer Pump
Our newest pneumatic transfer pump, the T4 which introduces “Pro-Connect” technology to our transfer pump family.
The innovative new Pro-Connect design of the T4 quickly connects/disconnects the air motor to/from the pump lower. This new Pro-Connect pump technology provides valuable new benefits to the user:

Transfer between drums quick and easy. Quickly change to a new drum of material without the mess of dripping chemical by using multiple pump lowers.
Quickly transition between different chemistries by using a dedicated pump lower for each chemical to eliminate the risk of cross contaminating your drums.
Reduce the necessary ceiling height of your rig. Easily transfer the T4 pump between drums in lower ceiling height rigs by quickly disconnecting the air motor from the lower before transferring the pump lower between drums.
The pump can be made lighter and easier to handle. Reduce the overall weight of the pump by disconnecting the motor from the lower when handling the pump.
Get up and running quickly when your pump lower requires maintenance by having a spare pump lower that can easily be installed.

Like the T3, the T4 pump utilizes the same proven Graco Merkur air motor so you get all the same benefits as the T3 pump:

It is quiet, about 3 times quieter than the T2 pump
The Merkur air motor is a 3:1 air to fluid pressure ratio, allowing you to use less air pressure to provide the same fluid pressure you require
It utilizes air pilot valve technology, so the air-motor valve switching is purely pneumatic. That means there are fewer parts to wear, maintain and replace.

The T4 pump lower is nearly identical to the T3 pump lower. It utilizes the same tapered lower design and the output is identical to the T3, which means it is plenty capable of keeping up with any of your high output Reactor proportioners. The T4 pump construction is electroless nickel plated carbon steel so it can be used with all your chemicals.

See table below to compare the specifications between the T3 and T4 pumps:

Pump	Ratio	Max Output Continuous	Max Input Air Pressure	Max Output Fluid Pressure	Weight	Height
T3	3:1	4.5 gpm (17 lpm)	100 psi (6.8 bar)	315 psi (21.7 bar)	22 lb (10 kg)	50.3 in (128 cm)
T4	3:1	4.5 gpm (17 lpm)	100 psi (6.8 bar)	315 psi (21.7 bar)	24.5 lb (11 kg)	49.8 in (126 cm)

The part numbers for the T4 pump, pump packages, and pump lower are as follows:

Part Number	Description
26D001	T4 Pump
26D002	Pump Package: 2 pumps and fluid supply kit
26D003	Pump Package: 2 pumps, fluid supply kit, air hose kit, and desiccant dryer kit
273295	Kit, Pump Lower

T4 Transfer Pump Specifications Like the T3, the T4 pump utilizes the same proven Graco Merkur air motor so you get all the same benefits as the T3 pump but with ProConnect technology:
• It is quiet, about 3 times quieter than the T2 pump
• The Merkur air motor is a 3:1 air to fluid pressure ratio, allowing you to use less air pressure to provide the same fluid pressure you require
• It utilizes air pilot valve technology, so the air-motor valve switching is purely pneumatic. That means there are fewer parts to wear, maintain and replace.

Transfer Material Efficiently Transfer Pumps are required to move A and B materials to the Reactor ® Spray Systems. The T4 Transfer Pump combines Graco’s proven Merkur ® air-motor and carbon steel pump lower. The T4 is a 3:1 ratio pump with ProConnect technology – allowing you to quickly connect and disconnect the air motor from the pump lower.
• Quick Transfer Between Drums – quickly change to a new drum of material without the mess of dripping chemical by using multiple pump lowers.
• Easier to Maneuver – easily transfer the T4 pump between drums by quickly disconnecting the air motor from the lower before transferring. This makes the pump lighter weight and reduces the necessary ceiling height of your rig.
• Eliminate Downtime – get up and running quickly when your pump lower requires maintenance by having a spare pump lower that can easily be installed.

Single Component Sprayer Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam, Singapore, China, Vietnam

Graco King E Series

T4 Pneumatic Transfer Pump

Xtreme-Duty Agitator

Xtreme Viscount II 4500 & 5000

T1, T2 and T3 Transfer Pumps

President 10:1

ToughTek P40 Rotor Stator Pump

ToughTek P30 and P30ht Mortar Pump

ToughTek P20 Mortar Pump

ToughTek MP20 and MP40 Mixing Pump

ToughTek M680a Mortar Pump

ToughTek CM40 Silo Continuous Mixer

ToughTek F680e

ToughTek CM20 & CM40 Continuous Mixer

ToughTek F340e Fireproofing Sprayer

Graco Merkur Pump X48 and X72

Graco e-Xtreme EX45

ToughTek S340e Stucco Sprayer

King Pump

Xtreme Z45, Z25 and Z60

Quick Links

Recent Post

Contact