PRECISION SWIRL

Applies a uniform, circular loop pattern with clean edges and no mess. PrecisionSwirl features adjustable rotational speed, stand-off distance and flow rate for greater control and for better penetration on irregular shaped parts. It is compatible with most sealants including expandable sealers, heat cure epoxy and PVC plastisol.
 

GRACO RELIABILITY

• Applies a uniform, circular loop pattern with clean edges and no mess
• Dispenses open or closed, wide or narrow pattern beads for a variety of applications
• Simplifies robotics programming for directional changes
• An orbiting nozzle allows you to apply material on vertical and horizontal surfaces
• Reduces manual touch-up, masking and rework

PROGRESSIVE CAVITY PUMP

The Graco Progressive Cavity pump is a positive displacement valve that is used to move and dispense medium to high viscosity materials. As the rotor revolves, material transfers within the pump through a sequence of predetermined, discrete cavities. This provides a continuous flow while maintaining the integrity of your material.
 

OUTSTANDING PERFORMANCE

• Continuous, volumetric dispense with high repeatability
• Wide range of adjustable flow rates
• Wear resistant and low maintenance
• Available in different sizes to meet a wide range of applications

MULTI-ORIFICE LINEAR STREAMING APPLICATOR (MOLSA)

Multi-Orifice Linear Stream Applicator (MOLSA) gives you faster cycle rates, more accurate dispensing and longer production life compared to competitive offerings.
 

REDUCE DOWNTIME

• Optimized coverage with no gaps
• Various width nozzle plates
• Multiple orifices for consistent pattern control and film build
• Durable stainless steel construction for minimal wear

IQ DISPENSE VALVES

iQ Dispense Valves deliver long-lasting and dependable performance for single component sealant and adhesive dispensing applications.
 

DEPENDABLE & VERSATILE DISPENSE VALVES

• Choose from a lineup of Tip Seal, Snuff-Back, or Ball-Seat models
• Variety of options available make it easy to customize to your application
• Compact and lightweight body for high production applications
• Durable design and components improve life cycles and minimize maintenance costs

 

iQ-T - Tip Seal Valve

• Forward acting shutoff
• Fast operation gives clean on/off results
• High-speed stitching applications 

iQ-S Snuff-Back Valve

• Snuff-Back (Reverse) acting shutoff
• No drool for thicker materials
• Use with outlet needles
• Adjustable Stroke

 

iQ-B Ball Seat Valve

• Forward acting shutoff
• Standard open/close applications
• Low restriction and wear-resistant

 

ENDURE - AUTOMATIC DISPENSE VALVES

Air-operated dispense valves used for sealant and adhesive materials. Graco EnDure valves offer exceptional reliability for high-pressure, high flow sealant and adhesive dispensing. Precise flow control which yields excellent bead geometry, trust our EnDure valves.
 

DURABLE, LONG-LASTING, AND PRECISE

• Dual seal design means fewer repairs
• Manifold mounted for repeatable positioning
• Air operated with spring-assisted closing means no leakage if air supply is lost
• Temperature conditioned and heated models available

DISPENSIT

Graco offers a broad line of precision Dispensit metering and dispensing valves for applications requiring low volume, single-component dispensing. Choose from a variety of Time Pressure On/Off, Pinch Tube, and Positive Displacement Metering Rod valves.

 

PRECISE. ACCURATE. RELIABLE.

• Variety of configurations to meet your project requirement
• Exceptional performance for a range of material viscosities
• Lightweight, compact designs are easily integrated to automated equipment
• Simple valve designs means easy maintenance
• Precise, repeatable shot-to-shot or bead dispensing

On/Off Valves

• Dispenses a range of material viscosities and flow rates 
• Offers continuous bead dispensing or rapid on/off cycling without reload time 
• Simple on/off control via PLC for integrated solenoid versions or versions for external pneumatic control

PRECISE. ACCURATE. RELIABLE.

• Variety of configurations to meet your project requirement
• Exceptional performance for a range of material viscosities
• Lightweight, compact designs are easily integrated to automated equipment
• Simple valve designs means easy maintenance
• Precise, repeatable shot-to-shot or bead dispensing

ADVANJET JET VALVES

Advanjet Jet Valves is Graco's complete line of microdispensing, non-contact jet valves designed to deliver high process accuracy and application flexibility in microdispensing dots, lines and complex shapes. What makes our technology different from other non-contact jets is the incredible simplicity of its patented design.
 

EASY TO CLEAN. OUTSTANDING PERFORMANCE.

• Minimal wear parts and maintenance – no fluid seals to clean or replace
• Precision dispense over any surface, including uneven, irregularly shaped, or hard-to-reach surfaces
• Superior pattern capability to create microdrops, lines or complex shapes
• Up to 300 drops/sec with outstanding repeatability
• Low to medium viscosities, handling materials up to 400,000 centipoise

1K ULTRA-LITE - PRECISION DISPENSE VALVE

Maximize production and material performance with our complete range of 1K Ultra-Lite Applicator & Dispense Valves from Graco. These lightweight valves were designed for durability and long service life for a multitude of bead dispense applications.
 

AIR OPERATED DISPENSE VALVE

• Eliminates snake-head and material drip
• Adjustable forward travel to reduce material surge
• Manual and automatic versions available
• Pistol grip version provides pilot on/off
• Severe-Duty needle and seat

MD2 - TWO COMPONENT MIXING DISPENSE VALVE

The MD2 Dispense Valve was designed to accurately dispense and mix plural-component sealants and adhesives.
 

INCREASE PRODUCTIVITY

• Minimizes maintenance time and costs while maximizing dispense time
• Designed with fewer parts and is easy to clean
• Streamlines maintenance and service
• Complete modular design adapts to different installation needs
• No unique tools required

PR-X METER, MIX AND DISPENSE SYSTEMS

The Graco PR-X solution is a meter, mix and dispense system for two component sealant and adhesive applications. Ideal for applications requiring both precision fluid dispensing and tight ratio tolerances, the servo-driven PR-X provides superior control and repeatability dispense for beads, dots and other patterns to ensure specifications are met every single time.
 

TRUE FIRST-IN-FIRST OUT FLUID PATH

• Precise and repeatable fluid paths
• Engineered fluid handling with durable parts
• Compact, lightweight, and designed for integration
• Solution to serve the Solar, Automotive Electronics, Telecommunication, and Battery industries

Cartridge Feed Solution

Feed raw material directly from cartridges mounted onto the PR-X. The preferred method for extremely high viscosity, highly filled materials, and micro-dispense applications.     

Supply Pump Feed Solution

Designed for high throughput dispensing of raw material. Supply material remotely using supply pumps designed to deliver from a wide range of container sizes. from cartridge to drum. 


 

Direct Mounted Dispense Valve

The direct mount option enables the PR-X system to be mounted onto automation solutions, minimizing floor space requirements. Ideal for the most highly filled and highest viscosity materials. 


 

Remote Mounted Dispense Valve

The remote mount options provides for more flexibility in the workspace design and minimizes automation payload requirements.