Accessories Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam, Singapore, China, Vietnam

The accessories are the supporting parts (such as guns, transfer pumps etc) to main Graco equipment (Reactors, main pumps etc)

Fusion PC Gun

Fusion ProConnect Gun
LESS PARTS. LESS LABOR. LESS DOWNTIME.

The days of spending time and effort cleaning and rebuilding the fluid section of your spray foam gun are gone. The new Fusion ProConnect (PC) gun features a disposable cartridge head that replaces multiple individual parts with a single component. Simply replacing a cartridge allows for a much faster rebuild, which keeps you spraying and minimizes costly downtime.

 

FUSION AP VS. FUSION PC

Exploded view: Fusion AP vs. Fusion PC

With ProConnect technology in the Fusion PC gun (right), the entire fluid section including side seals and all associated o-rings are replaced by a single cartridge, compared to individual parts like the Fusion AP (left).

PERFORMANCE

The Fusion PC sprays like any Fusion AP. Built on the time-tested Fusion AP platform, the new Fusion PC gun feels just like your Fusion AP and sprays with the same excellent spray pattern you're accustomed to. In fact, many of the same parts are used in the construction of the Fusion PC, so you can actually upgrade your existing Fusion AP guns to take advantage of the new ProConnect technology.


Probler P2

Probler P2 Plural-Component Air-Purge Gun

For high output spray polyurethane foam and polyurea applications

The Probler P2 Gun is lightweight and easy to maneuver – even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force – much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

The P2 elite:

  • Allows use of additional accessories
  • Alternate side block hose routings
  • Allows filters to be easily removed
  • Easy daily maintenance
  • Responsive trigger action
  • Easy-to-replace mix chamber insert
  • Anti-crossover design virtually eliminates possibility
    of material entering the air piston
  • Ergonomic handle and balanced design

GX7-400 and GX7-DI

GX7-400 and GX7-DI Plural-Component Mechanical-Purge Guns

For low- to medium-volume polyurea applications


The GX7-400 Gun is the same as a standard GX-7, but features a shorter stroke length. This is important for fast-setting polyureas because the material spends less time in the gun.

The GX7-DI Gun features direct impingement mixing, which provides a superior surface finish for polyurea applications. Its spray tip and gun block feature a non-stick coating for easy maintenance.

GX7-400
  • Mechanically self-cleaning eliminates costly solvent flushing
  • Screw-in filter design is easy to remove, clean and service
  • Rebuild kit available for air cylinder and trigger valve
  • Quick-connect coupling block allows fast, clean removal of the gun without any chemical spillage.

GX-8

GX-8 Plural-Component Spray Guns

For very low-output fast-set polyurea, polyurethane and hybrid coatings

The GX-8 Gun is designed for very low output, fast-set polyurea, polyurethane and hybrid coatings. It is designed to save on material consumption by significantly reducing overspray associated with low-output spraying.

  • Solvent-free, mechanically self-cleaning
  • Direct impingement mixing assures high yield per unit of material and superior surface finish
  • More air volume to air cap helps keep the gun's tip cleaner longer

GX-7

GX-7 Plural-Component Spray Guns

For spray polyurethane foam

GX-7 Mechanical-purge gun

  • GX-7, GX-7-DI and GX-7-400 mechanical-purge spray guns for dependable performance and reliability
  • Great mixing and pattern control with its unique internal impingement mixing design
  • Designed to handle the toughest job-site conditions
 
  1. Industry-proven mix and atomization technology
  2. Adjustable air cap cleaning allows you to spray longer
  3. Easy to clean A and B air filter reduce downtime

GAP Pro

GAP Pro Air-Purge Spray Gun

For high output spray polyurethane foam and polyurea applications


  • Designed for construction, bedlining, roofing and other plural-component spraying
  • Hardened steel sids seals and mix chamber for long-lasting performance
  • No adjustments necessary
  • Easy access screens reduce end-of-the-day maintenance time

  1. Easy to clean A and B filters reduce downtime
  2. Low maintenance fasteners are easy to remove with a standard nut-driver
  3. Direct hose connection reduces weight

Fusion Mechanical Purge Gun

Fusion Mechanical Purge Plural-Component Spray Gun

For high output spray polyurethane foam and polyurea applications


Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Fusion Mechanical Purge Main Needs
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities

Fusion CS Gun

Fusion CS Plural-Component Spray Gun with ClearShot™ Technology

For high output spray polyurethane foam and polyurea applications

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

ClearShot Technology - unprecedented features

Fusion CS Gun application
  • New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
  • Removes foam and keeps mix chamber clear
  • Saves almost an hour of maintenance time each spray day
  • First-ever liquid purge – reduces purge air by 75% and minimizes foam blowback
  • Easy-to-insert cartridge fits into ergonomic handle
  • Variable flow - an industry first
    • First plural-component gun with variable flow
    • Switch from large to small spray patterns in seconds
    • Gives you more maneuverability to spray in small, tight areas
    • Ten different settings
  • Quick-change front - simpler and cleaner
    • Swap out fluid heads in seconds
    • Non-stick polymer cover keeps gun head cleaner
    • 'Air knife' reduces material build-up
    • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

Fusion Air Purge

Fusion Air Purge Plural-Component Spray Gun

For high output spray polyurethane foam and polyurea applications

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

  • Easy air-blast tip cleaning reduces build-up and tip clogging.
  • Long-lasting side seals means less downtime for maintenance
  • Quick-release fluid housing - lets you easily change the mix chambers without tools
  • Hand-tightened front cap – no tools needed to clean and maintain seals and mix chamber
  • Ergonomic handle

XTR-5 and XTR-7 Airless Spray Guns

XTR-5 and XTR-7 Airless Spray Guns

Airless spray guns for protective coatings


Rugged, ergonomic design handles the toughest protective coatings

• Oval-insulated or round handle
• EasyGlide swivel for better hose and gun movement
• Easy Out gun filter which reduces tip plugging
 

IMG_0166

The ideal choice for hard-to-spray industrial coatings

  • Variety of handle and trigger options for maximum spraying comfort
  • Compact design allows for easy access to tight places
  • High quality materials and construction
  • XTR-5 maximum fluid pressure: 5000 psi (345 bar, 34.5 MPa)
  • XTR-7 maximum fluid pressure: 7250 psi (500 bar, 50 MPa)

XHD RAC SwitchTip

XHD RAC SwitchTip 

High-Pressure Airless Spray Tip for XTR Guns


Increase spraying productivity and reduce downtime

Designed for spraying high-solids coatings at high pressures. With its Reverse-A-Clean (RAC) Tip, it’s easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds – without removing the tip guard and housing.
 

Saves time – no screwdriver required

  • Change tip sizes in seconds
  • For heavy-duty applications up to 7250 psi (500 bar)
  • Recommended for use with Xtreme Sprayers and XTR Guns
  • Heavy-duty carbide tip

T1, T2 and T3 Transfer Pumps

T1, T2 and T3 Transfer Pumps Transfer Pumps

Ideal for moving A and B materials to Reactor spray machines



Graco's family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.

  • Provide consistent feed pressures and flow rates for dependable results
  • Lower pressure drops with higher viscosity materials at any ambient temperature
  • Designed and manufactured by the worldwide leader in pump technology
  • Longer lasting pump - designed for durability with less maintenance
  • Quick-release bung adapter for easy drum removal without interference from hose connections
  • Stainless steel wetted parts for corrosion-resistance
  • PTFE seals for improved performance and less maintenance

Reactor Heated Hose

Reactor Heated Hose Low- and High-Pressure Heated Hose

For Reactor proportioners

Critical to your Reactor system

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

  • Provides 10-times* the flex life compared to previous flat copper heating element
  • Long-term, even heating without hot spots
  • Backwards compatible with existing Reactor heated hoses

*Testing based on 1/4 in. 2000 psi heated hose

Reactor Xtreme-Wrap Heated Hose Application

New Xtreme-Wrap Scuff Guard

Xtreme-Wrap Scuff Guard is now the standard scuff guard for Graco's whip hoses models 246050 and 246055. It may be ordered with other selected hoses or as a kit to replace the standard scuff guard on any existing Graco hose.

  • Form fitting to the hose, no more baggy excess material
  • Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
  • Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
  • Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors











Reactor Hose Joint Protector

Joint Protectors

Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft hoses with the new Xtreme-Wrap will come with one Joint Protector.


   

Switch to Mobile Version